[SIGCIS-Members] Automation bibliography

Mon Jun 22 11:24:20 PDT 2015

SIGCIS members,

   The discussion of automation, (as it relates to displacement of human labor in favor of machines) and the over-arching concerns that result seem to parallel the impetus behind the Luddite movement of the nineteenth century. Does anyone think this notion meritorious? Does anyone think there are similarities? A question arises as to the extent and trajectory of technology as it relates to vocation. Can technology become too unrestrained when it causes jobs to evaporate, or will obsoleteness always bring a wave of new positions associated with the latest technology?

-Daniel Ferrell
Home Acceptance Corporation (NMLS #1151715). 
65 S. Outer Rd.
P.O. Box 72
Benton, MO 63736

From: dgolumbia at gmail.com
Date: Mon, 22 Jun 2015 13:18:43 -0400
To: members at sigcis.org
Subject: Re: [SIGCIS-Members] Automation bibliography

i was recently in one of the largest used bookstores in the US, in which there was an entire row dedicated to "computers." one entire shelf of that row, speaking roughly, was books with "automation" in the title. most from the 1980s, 1970s and before. it gave me some pause about the ability of we writers & humanists to impact the world of technological change, as much of what I leafed through (including many works I knew, some I'd read, and many more I didn't/haven't) could roughly be said to predict and caution against exactly what is happening today, particularly with regard to labor. 

On Mon, Jun 22, 2015 at 11:47 AM, Bernardo Batiz-Lazo <bbatiz64 at gmail.com> wrote:
You may also want to look at
Booth, A. E. (2007). The Management of Technical Change: Automation in the U.K. and U.S.A. since 1950. Basingstoke: Palgrave.

BestBernardoBangor University (Wales)
On 15 Jun 2015, at 23:19, Ian S. King <isking at uw.edu> wrote:
Another take on replacement - not for economic reasons, but in obsessive obeisance to other values - is the classic, "With Folded Hands".  
On Mon, Jun 15, 2015 at 10:15 PM, Andrew Meade McGee <amm5ae at virginia.edu> wrote:
Another cultural suggestion to pair with the Desk Set is the May 1964 episode of The Twilight Zone, "The Brain Center at Whipple's." One of those Rod Serlingesque accounts of an efficiency expert who completely automates a factory, laying off all the assembly line workers, until his job too is replaced with a robot. Not the most profound account, but reflective of period anxieties. 
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
Andrew Meade McGee
Corcoran Department of History
University of Virginia
PO Box 400180 - Nau Hall
Charlottesville, VA 22904

On Mon, Jun 15, 2015 at 5:53 PM, McMillan, William W <william.mcmillan at cuaa.edu> wrote:
Don't forget Spencer Tracy and Katharine Hepburn in Desk Set (1957)!

________________________________

From: Members [members-bounces at lists.sigcis.org] on behalf of James Cortada [jcortada at umn.edu]

Sent: Monday, June 15, 2015 4:03 PM

To: Paul McJones

Cc: members at sigcis.org

Subject: Re: [SIGCIS-Members] Automation bibliography

I devote attention to the subject as it related to manufacturing in the USA, with lots of bibliography, in The Digital Hand: How Computers Changed the Work of American Manufacturing, Transportation, and Retail Industries (Oxford U Press, 2004).

On Mon, Jun 15, 2015 at 2:21 PM, Paul McJones <paul at mcjones.org<mailto:paul at mcjones.org>> wrote:

Paul,

Burt Grad described the creation of GE’s first applications for the UNIVAC I in this article:

The First Commercial Computer Application at General Electric

By: Burton Grad, December 2006

http://ethw.org/First-Hand:The_First_Commercial_Computer_Application_at_General_Electric

He said a large team was assigned the task of writing a payroll system for the Washer and Dryer Department, while he was assigned the task of writing a manufacturing control system for the Dishwasher and Disposer Department. It took him about six months, and his programs "operational long before the payroll system was completed.”

I’m not sure exactly what manufacturing control referred to, but I suspect it involved scheduling and tracking the movement of parts and subassemblies, but not actually performing real-time control of any machinery.

Paul McJones

On Jun 15, 2015, at 11:32 AM, Ceruzzi, Paul <CeruzziP at si.edu<mailto:CeruzziP at si.edu>> wrote:

... When GE installed one of the first commercial UNIVACs at their Louisville, KY appliance plant, they were concerned with the topic of automation eliminating jobs and its possible bad publicity. ...

All that from the installation of a vacuum-tube computer with very primitive, by modern standards, computing power. A further irony is that the UNIVAC, as far as I could tell, did not have anything to do with automating production on the factory floor.

_______________________________________________

This email is relayed from members at sigcis.org<http://sigcis.org>, the email discussion list of SHOT SIGCIS. Opinions expressed here are those of the member posting and are not reviewed, edited, or endorsed by SIGCIS. The list archives are at http://lists.sigcis.org/pipermail/members-sigcis.org/ and you can change your subscription options at http://lists.sigcis.org/listinfo.cgi/members-sigcis.org

--

James W. Cortada

Senior Research Fellow

Charles Babbage Institute

University of Minnesota

jcortada at umn.edu<mailto:jcortada at umn.edu>

608-274-6382

_______________________________________________

This email is relayed from members at sigcis.org, the email discussion list of SHOT SIGCIS. Opinions expressed here are those of the member posting and are not reviewed, edited, or endorsed by SIGCIS. The list archives are at http://lists.sigcis.org/pipermail/members-sigcis.org/ and you can change your subscription options at http://lists.sigcis.org/listinfo.cgi/members-sigcis.org

_______________________________________________

This email is relayed from members at sigcis.org, the email discussion list of SHOT SIGCIS. Opinions expressed here are those of the member posting and are not reviewed, edited, or endorsed by SIGCIS. The list archives are at http://lists.sigcis.org/pipermail/members-sigcis.org/ and you can change your subscription options at http://lists.sigcis.org/listinfo.cgi/members-sigcis.org

-- 
Ian S. King, MSIS, MSCS, Ph.D. Candidate
The Information School
Archivist, Voices From the Rwanda Tribunal Value Sensitive Design Research Lab
University of Washington

There is an old Vulcan saying: "Only Nixon could go to China." 

_______________________________________________
This email is relayed from members at sigcis.org, the email discussion list of SHOT SIGCIS. Opinions expressed here are those of the member posting and are not reviewed, edited, or endorsed by SIGCIS. The list archives are at http://lists.sigcis.org/pipermail/members-sigcis.org/ and you can change your subscription options at http://lists.sigcis.org/listinfo.cgi/members-sigcis.org

_______________________________________________

This email is relayed from members at sigcis.org, the email discussion list of SHOT SIGCIS. Opinions expressed here are those of the member posting and are not reviewed, edited, or endorsed by SIGCIS. The list archives are at http://lists.sigcis.org/pipermail/members-sigcis.org/ and you can change your subscription options at http://lists.sigcis.org/listinfo.cgi/members-sigcis.org

-- 
David Golumbia
dgolumbia at gmail.com

_______________________________________________
This email is relayed from members at sigcis.org, the email discussion list of SHOT SIGCIS. Opinions expressed here are those of the member posting and are not reviewed, edited, or endorsed by SIGCIS. The list archives are at http://lists.sigcis.org/pipermail/members-sigcis.org/ and you can change your subscription options at http://lists.sigcis.org/listinfo.cgi/members-sigcis.org 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sigcis.org/pipermail/members-sigcis.org/attachments/20150622/66f7ff6d/attachment-0002.htm>