Re: [SIGCIS-Members] Cray 1 serial number 01 being put together on Facebook Live at SC 2018
Hello all, According the the signage provided by Cray, this is Serial Number 1. See photo below. The unit has a imprinted serial number "01" on the base. Sorry for the earlier inaccuracy referencing serial number 0. I was told by a Cray person that the unit on site was a test machine. /r Kevin Walsh kwalsh@ucsd.edu in ref to... On Mon, Nov 12, 2018 at 7:29 AM, Cynde Moya <CyndeM@livingcomputers.org> wrote:
I was at the Bradbury Museum a year or so ago. They had an exhibit about supercomputing built around a CRAY-1. The front-end staff did not know the serial number. Perhaps this is Serial number 2 you refer to?
Cynde Moya
*From:* Members <members-bounces@lists.sigcis.org> *On Behalf Of *Grider, Gary Alan *Sent:* Friday, November 9, 2018 2:13 PM *To:* Kevin Walsh <kwalsh@ucsd.edu>; members@lists.sigcis.org *Cc:* Tom Hutton <hutton@sdsc.edu>; Ian MacConnell ( ianmacconnellsc@gmail.com) <ianmacconnellsc@gmail.com> *Subject:* Re: [SIGCIS-Members] Cray 1 serial number 0 being put together on Facebook Live at SC 2018
Perhaps I should share why serial number 1 was sent back to Cray since this is a history group.
When Serial 1 showed up in Los Alamos in 1976 it wouldn’t run for more than a few minutes yet it would run for hours in Minnesota.
Turns out there was no memory protection and cosmic events at Los Alamos altitude were different enough from Minnesota.
The memory was reworked and protection was added. Serial number 1 was a bit of a testbed and had many mods/corrections made
before subsequent machines were produced in 1977 and beyond. That was the intent of the trial.
Gary
*From:* Grider, Gary Alan *Sent:* Friday, November 9, 2018 3:01 PM *To:* 'Kevin Walsh' <kwalsh@ucsd.edu>; members@lists.sigcis.org *Cc:* Tom Hutton <hutton@sdsc.edu>; Ian MacConnell ( ianmacconnellsc@gmail.com) <ianmacconnellsc@gmail.com> *Subject:* RE: [SIGCIS-Members] Cray 1 serial number 0 being put together on Facebook Live at SC 2018
I think there is a correction to be made here:
From https://www2.cisl.ucar.edu/supercomputer/c1
“By 1975, NCAR's 7600 was straining under a severe overload. SCD was oversubscribed; turnaround time had become intolerable. A request for proposal (RFP) was issued, resulting in an order for a CRAY-1A. While serial number 1 of the CRAY-1 computer system had been shipped to the Los Alamos National Laboratory in 1976 for a six-month trial period, NCAR was Cray Research's first official customer.
On July 11, 1977, the CRAY-1A, serial number 3, was delivered to NCAR. The system cost was $8.86 million ($7.9 million plus $1 million for the disks).”
For a long time, Serial number 1 sat in the Bradbury Museum in Los Alamos until Cray asked if they could have it for their Chippewa <https://www.google.com/search?q=chippewa&spell=1&sa=X&ved=0ahUKEwi9_Iilp8jeAhWFiVQKHTvIBSEQkeECCC8oAA&biw=1125&bih=1215> museum.
They shipped Los Alamos Serial number 2 for the Bradbury Museum. I believe it is sitting in a back room at Bradbury now.
Thanks
Gary Grider
LANL
*From:* Members <members-bounces@lists.sigcis.org> *On Behalf Of *Kevin Walsh *Sent:* Friday, November 9, 2018 2:48 PM *To:* members@lists.sigcis.org *Cc:* Tom Hutton <hutton@sdsc.edu>; Ian MacConnell ( ianmacconnellsc@gmail.com) <ianmacconnellsc@gmail.com> *Subject:* [SIGCIS-Members] Cray 1 serial number 0 being put together on Facebook Live at SC 2018
All,
Cray 1 fabrication on Facebook LIVE happening now -
https://www.facebook.com/pg/SCconferences/videos/?ref=page_internal
The Cray 1 that was the first Cray at NCAR and then Los Alamos is currently being put together for display at the ACM/IEEE Supercomputer Conference in Dallas, Texas.
Folks in the Dallas area can stop by to see the Cray and supercomputing artifacts assembled for the 30th Anniversary of the SC conference.
We will record the fabrication and post a separate time lapse video after completion.
Regards,
Kevin Walsh
Scripps Institution of Oceanography
KK6FRK
(858)822-3356 <(858)%20822-3356>
kwalsh@ucsd.edu
Thanks Kevin, even Cray got it wrong it seems. Los Alamos National Lab is not in Albuquerque NM and neither was the first machine in Albuquerque either. Pretty amazing, they are only wrong by 100 miles. Oh well. Thanks again gary From: Kevin Walsh <kwalsh@ucsd.edu> Date: Monday, November 12, 2018 at 9:04 AM To: Cynde Moya <CyndeM@livingcomputers.org> Cc: Gary Grider <ggrider@lanl.gov>, members <members@sigcis.org>, "ianmacconnellsc@gmail.com" <ianmacconnellsc@gmail.com> Subject: Re: [SIGCIS-Members] Cray 1 serial number 01 being put together on Facebook Live at SC 2018 Hello all, According the the signage provided by Cray, this is Serial Number 1. See photo below. The unit has a imprinted serial number "01" on the base. Sorry for the earlier inaccuracy referencing serial number 0. I was told by a Cray person that the unit on site was a test machine. [cid:ii_joehxara1_16708a8a60ce4dbf] /r Kevin Walsh kwalsh@ucsd.edu<mailto:kwalsh@ucsd.edu> in ref to... On Mon, Nov 12, 2018 at 7:29 AM, Cynde Moya <CyndeM@livingcomputers.org<mailto:CyndeM@livingcomputers.org>> wrote: I was at the Bradbury Museum a year or so ago. They had an exhibit about supercomputing built around a CRAY-1. The front-end staff did not know the serial number. Perhaps this is Serial number 2 you refer to? Cynde Moya From: Members <members-bounces@lists.sigcis.org<mailto:members-bounces@lists.sigcis.org>> On Behalf Of Grider, Gary Alan Sent: Friday, November 9, 2018 2:13 PM To: Kevin Walsh <kwalsh@ucsd.edu<mailto:kwalsh@ucsd.edu>>; members@lists.sigcis.org<mailto:members@lists.sigcis.org> Cc: Tom Hutton <hutton@sdsc.edu<mailto:hutton@sdsc.edu>>; Ian MacConnell (ianmacconnellsc@gmail.com<mailto:ianmacconnellsc@gmail.com>) <ianmacconnellsc@gmail.com<mailto:ianmacconnellsc@gmail.com>> Subject: Re: [SIGCIS-Members] Cray 1 serial number 0 being put together on Facebook Live at SC 2018 Perhaps I should share why serial number 1 was sent back to Cray since this is a history group. When Serial 1 showed up in Los Alamos in 1976 it wouldn’t run for more than a few minutes yet it would run for hours in Minnesota. Turns out there was no memory protection and cosmic events at Los Alamos altitude were different enough from Minnesota. The memory was reworked and protection was added. Serial number 1 was a bit of a testbed and had many mods/corrections made before subsequent machines were produced in 1977 and beyond. That was the intent of the trial. Gary From: Grider, Gary Alan Sent: Friday, November 9, 2018 3:01 PM To: 'Kevin Walsh' <kwalsh@ucsd.edu<mailto:kwalsh@ucsd.edu>>; members@lists.sigcis.org<mailto:members@lists.sigcis.org> Cc: Tom Hutton <hutton@sdsc.edu<mailto:hutton@sdsc.edu>>; Ian MacConnell (ianmacconnellsc@gmail.com<mailto:ianmacconnellsc@gmail.com>) <ianmacconnellsc@gmail.com<mailto:ianmacconnellsc@gmail.com>> Subject: RE: [SIGCIS-Members] Cray 1 serial number 0 being put together on Facebook Live at SC 2018 I think there is a correction to be made here: From https://www2.cisl.ucar.edu/supercomputer/c1 “By 1975, NCAR's 7600 was straining under a severe overload. SCD was oversubscribed; turnaround time had become intolerable. A request for proposal (RFP) was issued, resulting in an order for a CRAY-1A. While serial number 1 of the CRAY-1 computer system had been shipped to the Los Alamos National Laboratory in 1976 for a six-month trial period, NCAR was Cray Research's first official customer. On July 11, 1977, the CRAY-1A, serial number 3, was delivered to NCAR. The system cost was $8.86 million ($7.9 million plus $1 million for the disks).” For a long time, Serial number 1 sat in the Bradbury Museum in Los Alamos until Cray asked if they could have it for their Chippewa<https://www.google.com/search?q=chippewa&spell=1&sa=X&ved=0ahUKEwi9_Iilp8jeAhWFiVQKHTvIBSEQkeECCC8oAA&biw=1125&bih=1215> museum. They shipped Los Alamos Serial number 2 for the Bradbury Museum. I believe it is sitting in a back room at Bradbury now. Thanks Gary Grider LANL From: Members <members-bounces@lists.sigcis.org<mailto:members-bounces@lists.sigcis.org>> On Behalf Of Kevin Walsh Sent: Friday, November 9, 2018 2:48 PM To: members@lists.sigcis.org<mailto:members@lists.sigcis.org> Cc: Tom Hutton <hutton@sdsc.edu<mailto:hutton@sdsc.edu>>; Ian MacConnell (ianmacconnellsc@gmail.com<mailto:ianmacconnellsc@gmail.com>) <ianmacconnellsc@gmail.com<mailto:ianmacconnellsc@gmail.com>> Subject: [SIGCIS-Members] Cray 1 serial number 0 being put together on Facebook Live at SC 2018 All, Cray 1 fabrication on Facebook LIVE happening now - https://www.facebook.com/pg/SCconferences/videos/?ref=page_internal The Cray 1 that was the first Cray at NCAR and then Los Alamos is currently being put together for display at the ACM/IEEE Supercomputer Conference in Dallas, Texas. Folks in the Dallas area can stop by to see the Cray and supercomputing artifacts assembled for the 30th Anniversary of the SC conference. We will record the fabrication and post a separate time lapse video after completion. Regards, Kevin Walsh Scripps Institution of Oceanography KK6FRK (858)822-3356<tel:(858)%20822-3356> kwalsh@ucsd.edu<mailto:kwalsh@ucsd.edu>
participants (2)
-
Grider, Gary Alan -
Kevin Walsh